Menene hanyoyin aiwatarwa da aikace-aikacen injina?

Machining, yana nufin aiwatar da daidaitaccen cire kayan da suka wuce gona da iri ta hanyar ƙera kayan gargajiya bisa ga sifa da girman buƙatun zane, don sanya blank ɗin ya dace da juriya na geometric da ake buƙata ta zane.

An raba mashin ɗin zamani zuwa injinan hannu damashin sarrafa lamba.Manual machining yana nufin ma'aikacin aiki lathes, milling inji, grinders da sauran inji kayan aiki daidai aiwatar da workpiece, wanda ya dace da samar da guda da kananan tsari sassa;NC machining shine mai aiki ya saita harshen shirin don kayan aikin CNC.CNC tana sarrafa axis na kayan aikin injin NC don aiwatarwa ta atomatik bisa ga buƙatun ta hanyar ganowa da fassarar harshen shirin, wanda ya dace da sarrafa manyan yawa da sassa masu rikitarwa.

Ƙayyadaddun hanyoyin sarrafa mashin ɗin sun haɗa da juyawa, niƙa, niƙa, filashi, hakowa, gundura, tsarawa, naushi da sarewa, da kuma sarrafa wutar lantarki, maganin zafi, yankan waya, ƙirƙira da sauran hanyoyin.

①Lathe: lathe, yafi ta hanyar kayan aikin juyawa don aiwatar da aikin jujjuyawar a cikin motsin fassarar layi ko lanƙwasa.Juyawa na iya sa aikin aikin ya kai ga siffarsa, wanda ya dace da sarrafa shafts da sassa masu juyawa;

②Milling: milling inji, wanda yafi aiwatar da workpiece gyarawa a kan workpiece tebur ta hanyar juyawa kayan aikin, kuma ya dace da sarrafa jiragen sama, tsagi, daban-daban mai lankwasa saman ko gears;

③Nika: nika inji, wanda yafi grinds jirgin sama, m da'irar, ciki rami da kuma kayan aiki na workpiece ta hanyar high-gudun juyawa nika dabaran, da kuma surface roughness na machined workpiece ne musamman high;

④Pliers: Ana amfani da benci na benci don ma'auni daidai, bincika daidaiton girma da tsari da kuskuren matsayi na sassa, da yin madaidaicin alama.Yana da kayan aiki na asali da aiki a cikin masana'anta;

⑤Yin hakowa: hakowa da workpiece tare da kayan aiki irin su rawar soja;

⑥M: yi amfani da mai yankan ramuka ko ruwa don aiwatar da ramuka, wanda ya dace da ramuka tare da madaidaicin madaidaici da babban diamita;

⑦Tsara: Jirgin sama ko mai lankwasa ana sarrafa shi ta hanyar mai tsarawa, wanda ya dace da yin aikin shimfida layi na layi, amma rashin ƙarfi na saman bai kai na injin milling ba;

⑧Punch: danna naushi, wanda ake amfani da shi don naushi da siffa, kamar bugun naushi ko naushi;

⑨Sassauta: sawing inji, dace da yankan bayan blanking.

Abubuwan da ke sama su ne matakai da yawa da ake amfani da su a cikin injina.Ta hanyar hanyoyin da ke sama, gaba ɗaya girman kayan aikin na iya saduwa da wasu buƙatu.